Hi, In this post we will talk in detail about How to Program Spectrum Remote to TV. Here you will get step-by-step instructions to program your spectrum remote control with any brand of TV. No matter which model of the spectrum remote you have, we have covered almost all spectrum remote programming setups.

If you’ve recently bought a newer Spectrum remote and are having trouble programming it to your TV, you’re not alone. This can be a frustrating experience, but fear not! In this article, we’ll go over the steps you need to take to successfully program your Spectrum remote to your TV.

How to Program Spectrum Remote to TV – Newer Models

First, let’s make sure you have the right remote. The newer Spectrum remote should have a “TV” button at the top, with the Spectrum logo in the middle. If you don’t have another spectrum remote control, please try a suitable method for your remote, scroll down to find the instructions to program your remote.

Once you’ve confirmed you have the right remote, follow these steps to program it to your TV:

  • Make sure your TV is On.
  • Press and hold the OK and Menu button at the same time until the Input button clicks twice.
  • Once that blinks twice, It will blink once and it will blink two times in succession
  • Now press the TV’s POWER button.
  • Then the input will light up solid.
  • After that, Aim the remote at the TV and Hold the UP arrow until the TV turns off
  • If it turns off you are all set.

Video Guide

Programming the CLIKR-5 Spectrum Universal Remote

If you’re having trouble using your CLIKR-5 Spectrum Universal Remote, you may need to program it to work with your TV, or other home entertainment devices. This can be a simple process if you follow the right steps. In this section, we’ll go over how to program your CLIKR-5 Spectrum Universal Remote to any brand TV.

First, let’s make sure you have the right remote. The CLIKR-5 Spectrum Universal Remote should have a “System” and “Power” buttons at the top, with the Spectrum logo in the middle.

  • Start with Turning On Your TV
  • For 3 seconds, Press and Hold the both “TV” and “OK/SEL” buttons on your remote at the same time
  • On the top, the Glowing “TV” button will indicate that your remote is ready to be programmed.
  • Now press the Channel Down button and Hold it steady
  • It will start searching for the right Code for your TV
  • Now, wait until the TV turns Off automatically.
  • Try turning your TV On with your remote, if it worked that’s great, if not then try this process again and again.

Programming 1060BC2 / 1060BC3 Remotes with TV

  • Press the TV button once, it should blink once
  • Now, Press and hold the SETUP button on the remote and keep holding it until the TV button blinks
  • Now enter the right code for your TV brand, Find Spectrum Remote Codes Here or Find it on the Spectrum Official Website.
  • And the TV button should blink twice, if it does great you are almost done.
  • If you got a long blink instead, Simply follow this procedure again and enter a different code.

Conclusion

So guys, Programming a Spectrum remote to your TV can be a simple process if you follow the right steps. Make sure you have the right remote, enter the correct code for your TV brand, and test the remote to ensure it’s working properly. If you need help, don’t hesitate to contact Spectrum customer service for assistance.