How To Fix Screen Flickering After Upgrading To Fall Creators Update

The long-awaited Windows 10 Fall Creators Update is finally here and we’ll see is it going to meet the expectations. Just like it’s predecessor, the Redstone 3 update brings out arguably mediocre improvements and a lot of issues.

Download DriverFix (verified download file).
Click Start Scan to find all problematic drivers.
Click Update Drivers to get new versions and avoid system malfunctionings.
DriverFix has been downloaded by 0 readers this month.

One of the most sensitive problems we bump into is an unusual screen flicker. It emerged immediately after the upgrade so it’s safe to say that Fall Creators Update is the one to blame.

In order to address this, we compiled a list of possible solutions and curated them for you. If your screen flickers or behaves unusually in any other manner, consider following the steps below.

How to fix screen flickering in Windows 10 Fall Creators Update

Check GPU drivers
Uninstall the third-party antivirus
Change display refresh rate
Update BIOS
Reset this PC

1. Check GPU drivers

When it comes to screen-related issues, you should first point your finger at GPU drivers. Most of the time, the main culprit for flickering, stutters, resolution drops, sudden black screens, and other not-so-welcomed distresses are faulty or unsuitable drivers. And, it seems that it’s a trend for every new Windows version to cause some kind of incompatibility-provoked issue in regards to drivers.

So, your further actions are simple: check drivers > uninstall the generic driver > install the official driver > tap yourself on the shoulder and enjoy in Fall Creators Update without the screen flickering. If this looks like something too much to handle on your own, make sure to follow the instructions below:

Press Windows key + I to bring out the Settings app.
Click on the Update & security section.
Choose Recovery from the left pane.
Click on the ”Restart Now” button.
Choose Troubleshoot from the Windows Recovery Environment.
Click Advanced options.
Select Startup settings and then Restart.
Press 5 to let your PC boot in Safe Mode with Networking.
Now, right-click on the Start button and open Device Manager.
Navigate to Display adapters.
Right-click on your GPU device and uninstall it.
Restart your PC.

If that wasn’t enough and you’re still experiencing issues, make sure to navigate to one of these websites, depending on your GPU model, and download official driver provided by the manufacturer.

AMD/ATI
NVidia
Intel

Keep in mind that all drivers must be updated for your PC to work properly. In order to prevent PC damage by installing the wrong driver versions, we suggest updating drivers automatically by using a specialized driver updater tool.

This type of tool will automate the entire process on your behalf and will search, update and download the appropriate driver version for your device avoiding permanent damage on PC.

2. Uninstall the third-party antivirus

This is a long shot solution but even the stranger things have happened in Windows 10 so it’s worth giving it a try. The feud between Windows 10 and third-party antivirus solutions is well-known.

To make sure that everything goes smoothly and avoid any kind of GPU driver errors, be sure to use a complete driver update assistant that will solve your problems with just a couple of clicks, and we strongly recommend DriverFix. Follow these easy steps to safely update your drivers:

Download and install DriverFix.
Launch the software.
Wait for DriverFix to detect all your faulty drivers.
The application will now show you all the drivers that have issues, and you just need to select the ones you’d liked fixed.
Wait for the app to download and install the newest drivers.
Restart your PC for the changes to take effect.

Disclaimer: this program needs to be upgraded from the free version in order to perform some specific actions.

DriverFix

Keep you GPU on the peaks of their performance without worrying about its drivers.

It can cause a lot of issues, especially with the introduction of usable, non-marginalized Windows Defender. The possible conflict might affect the overall performance and cause various issues.

Because of that, we advise you to uninstall antivirus and look for changes. If you’re still stuck with the irritating screen flickering, you can always install antivirus of choice again. Follow the instructions below to get rid of the antivirus temporarily:

In the Windows Search bar, type Control and open Control Panel.
Choose Category view.
Select Uninstall a program.
Locate your antivirus on the list, right-click on it and select Uninstall.
After the antivirus is gone, restart your PC and look for changes.

Additionally, some antivirus solutions are more resistant to uninstalling, so you might need to boot into Safe Mode and remove them that way.

3. Double-check display’s refresh rate

Now, we’re still roaming in ”not likely” grounds, but the refresh rate, as same as other system settings, can get disrupted by the latest Windows update.

Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.Click here to download and start repairing.

Expert tip:

4. Update BIOS

Switching back and forth from Windows 10 to its predecessors is usually a simple and clean operation. However, occasionally BIOS can pose as the stumbling block and create a lot of issues.

In this case, if you upgraded from Windows 7 or 8 to Windows 10 and you’re running an older motherboard, the old UEFI/BIOS firmware might not suffice.

Consequently, the not fully functional firmware that’s incompatible with Windows 10 can further affect GPU and that creates a line of problems that are hard to cope with.

So, what you’ll need to do is to update your BIOS and, hopefully, resolve all screen issues that way. However, updating BIOS isn’t exactly simple or rather, it can have fatal consequences.

Therefore, we advise you to look up for your motherboard and inform in detail about available BIOS versions and the update procedure. We have a great article about BIOS updating (flashing), so make sure to check it out here.

5. Reset this PC

Finally, if none of the previously enlisted solutions worked for you, don’t worry, we won’t yield yet. There’s turning to restore options as the last resort. Or the ”Reset this PC” option that’s the most thorough when it comes to problem resolving. It’s somewhat analog to the clean reinstall procedure, but the main difference lies in the fact that it lets you keep your apps and files.

If you’re not certain about the recovery options, make sure to follow these instructions closely:

Use Windows key + I to open Settings.
Choose Update & security.
Select Recovery from the left-side pane.
Under the ‘Reset this PC‘ option, click Get started.
Choose whether you want to keep your files or delete everything.
Click Next and then Reset.
The procedure is a bit long but it will eventually restore your PC to factory values.

This is probably the best-suited solution for users that upgraded to Windows 10 rather than performing a clean reinstall. Just in case you can’t launch the reset process, check out this troubleshooting guide to fix the issue.

That should do it. If you have questions, suggestions or possibly an alternative solution or two, please do share them with us in the comments section below.

How to fix screen flickering in Windows 10 Fall Creators Update#

1. Check GPU drivers#

2. Uninstall the third-party antivirus#

DriverFix#

3. Double-check display’s refresh rate#

4. Update BIOS#

5. Reset this PC#