At times when there is a power outage, and you might experience printer problems after the power outage. If you’ve ever fallen victim of this and you are looking for a way out, you just caught a break!

  • Download DriverFix (verified download file).

  • Click Start Scan to find all problematic drivers.

  • Click Update Drivers to get new versions and avoid system malfunctionings.

  • DriverFix has been downloaded by 0 readers this month.

In the next section of this article, we’ll be bringing you a set of troubleshooting techniques, any of which can be employed to restore connectivity when your printer goes offline after a power outage.

How do I fix my printer after power outage? If you have a wireless printer, be sure to restart your router and check if that solves the problem. Alternatively, you can try resetting your network printer settings or disable the SNMP Protocol.

What to do if the printer will not print after a power outage

  • Reset Wireless Router or Modem
  • Reconfigure Network Settings
  • Disable SNMP Protocol

1. Reset Wireless Router or Modem

If your printer is connected to your PC via a wireless connection, a power outage is likely to disrupt the connection, and send the printer offline. When this happens, you can try restarting the wireless router by unplugging the cable and then replugging it after a few minutes.

By resetting the router, the network reboots and your printer should now be back online. If this procedure could not resolve the issue, you can try the next solution.

Note: This method is only applicable on printers that are connected via a wireless network.

  • READ ALSO: FIX: Printer doesn’t scan in Windows 10, 8.1

2. Reconfigure Network Settings

At times, there could be issues with your network settings, which could have been reconfigured without your knowledge. This is especially common if there are multiple users on the printer.

To resolve this, simply restore the network settings back to default, and then try reconnecting the printer to your wireless network. Follow the guidelines below to reset network settings:

  • Locate the control panel of the printer.
  • On the dashboard, locate and click on Network Setup.
  • Tap on the Restore Network Settings
  • In the confirmation window, select YES.
  • Print configuration page and check if the settings have been restored to default.
  • Restart the printer.

After restarting your printer, follow through the next set of steps to finish the setup process:

  • Go to the control panel of the printer.
  • Open the panel’s dashboard.
  • Navigate to the Settings menu.
  • Click on the Wireless Settings option.
  • In the next window, tap the Wi-Fi Protected Setup option or the Wireless Setup Wizard.
  • Follow the instructions to finish up the process.

Once this is done, try reconnecting the printer to your home/office wireless network, and see if it comes online. If it does, enjoy your printing; otherwise, you can try the next fix.

Note: This troubleshooting method is exclusive to wireless HP printers.

3. Disable SNMP Protocol

If you have printer problems after the power outage, perhaps disabling the SNMP protocol will help.

  • READ ALSO: 7 of the best Windows 10 scanner software to speed up your paperwork

To disable SNMP, follow the guidelines below:

  • Open Control Panel.
  • Select Devices and Printers.
  • Locate the printer and right-click on it.
  • Click on Printer properties.
  • In the next window, click on the Ports.
  • Click on Configure Port.
  • Locate and uncheck the SNMP Status Enabled
  • Click OK to apply changes.
  • Exit program.

Once the SNMP is disabled, check if the printer is back online, and see if it now works normally.

There you go, these are our solutions that can help you fix your printer after a power outage. Feel free to try all of our solutions and let us know in the comment box which solution worked for you.

READ ALSO:

  • What to do if your printer prints paper crooked [EXPERT FIX]
  • Fix There was an error opening your printer on Photoshop [FULL GUIDE]
  • The printer driver package could not be installed [Fix]

If the advices above haven’t solved your issue, your PC may experience deeper Windows problems. We recommend downloading this PC Repair tool (rated Great on TrustPilot.com) to easily address them. After installation, simply click the Start Scan button and then press on Repair All.

Still having issues? Fix them with this tool:

SPONSORED

  • windows 10 fix

Email *

Commenting as . Not you?

Comment